Compatible with ELEGOO Mars 4 / Mars 4 Ultra / Mars 4 Max / Saturn / Saturn S, Photon Mono X, Mono X 6K / Mono X 6KS / Mono X2 / Photon M3 / M3 Plus, Sonic Mini 8K / Mighty 4K, Halot Lite / Halot Ray / LD-006 7.1-9.25 inch mono resin 3D printers.

Package included: 6 PCS 260*200mm FEP Film

FEP Film Specification:

- UV transparency: Exceeds 95%

- Size: 260 * 200mm

- Thickness: 0.15mm

- Heat resistance: -240 ° C to 205 ° C.

- High ductility: 300%of ductility

- Good flexibility: 10,000 bend tests

- Stable release force: Coating uniformity

- Smooth surface: No wrinkles, scratches and bubbles

- High cleanliness: Production in no-dust workshop

FEP Film Installation Steps:

- Step 1: Remove screws at the bottom of the resin vat and take out the broken release film.

- Step 2: Then place the release film between two steel rims

- Step 3: Finally put the installed steel wheel back into the resin vat and tighten the screws

- To remove fingerprints, wipe the FEP film with a lint-free cloth and isopropyl alcohol (IPA).

- NOTE： Be sure to remove the plastic protective cover on both sides of each sheet before mounting.