مميزات خاصة

Bare Fiber Protection Sleeves--This heat shrinkable tubes is for bare fiber protection，which consists of a heat-shrinkable outer tube, a hot-melt inner tube and a stainless steel needle, which has the characteristics of fast shrinkage and high efficiency. In addition, the steel needle of tube is chamfer design, which will not stick to the wall but also anti-static, so that the performance of the optical fiber heat shrinkable tube can be maximized
Easy Operation--The adoption of the transparent sleeve helps the user to check the splicing of the optical fiber at any time during the installation process and detect whether the connection of the splicing part is correct, which will reduce the risk of adverse effects on the optical fiber and make the operation safer and simpler
Reliable Design--The lock design at both ends of this fiber optic heat shrink tube can effectively prevent the inner steel needle from falling off. Its sealed structure also makes the splicing have good flame retardant and insulating functions, and does not affect the optical transmission characteristic of the optical fiber after shrinkage.
Widely Application--High-quality optical fiber fusion splicing protection sleeve are very suitable for electrical insulation, wire bundling, mechanical protection, wire/cable joints and daily repairs etc.
Material: Polyolefin, Stainless Steel Single holed(preshrunk)ends eliminates improper fiber threading; Operating temperature: -45 to +100°C; Minimum fully recovery temperature: 120°C.
Package Included--200PCS Heat Shrink Tubing; Inner Tube Diameter: 1.3mm; Outer Diameter: 2.6mm; Length: 60mm.

وصف

Product Specifications:
Product Type: Optical Fiber Heat Shrinkage Tube
Product Color: Transparent
Whole length: 61mm
Outer diameter after recovery: OD2.5 mm +/- 0,1mm
Hole diameter before recovery: OD1.5 mm
Stainless steel needles diameter: OD 1.2 mm
Minimum installation (shrinking) temperature: 110°C
Max installation time: 60 seconds
Low Temperature property: No crackle at -55°C lasting 4 hours
Product Material: Stainless steel needle & PE material

Packing List: 200 Pcs Bare Fiber Heat Shrinkable Tubes

【Installation Instructions】
Step 1: Thread the optical fiber cable into the heat shrinkable tube
Step 2: Cut after peeling off the coating of the optical fiber cable
Step 3: Put into the optical fiber fusion splicer for fusion splicing
Step 4: Move the heat shrinkable tube to the welding place and then put it into the heating tank for heating
Step 5: Finished

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه