XGecu T56 programmer is a 56-pin full-drive programmer, which is common to all chips in the same package within 56 pins. Each adapter has a clear prompt in the software, the pin check function is located to the pin number of the chip. No adapter required for any DIL devices, All programming adapters are fully open source, No encryption adapter is used. You can buy a universal adapter, or make your own adapters. This feature will bring customers incomparable convenience, it will save you a lot of money.High-speed programming of a Parallel NAND FLASH Functions of Parallel NAND for Parallel: 1. Support OTP programming 2. Automatic Indentification supported by ONFI standard 3. Support UID (unique signature) reading 4. Support multiple file operations 5. Support NAND parameter custom function, (new chips can be added by custom parameters) 6. Reserved custom interface to provide free technical support for bad block management and ECC algorithm. we can customize according to user requirements. 7. The programming clock is adjustable. Parallel NAND capacity can reach more than 256Gb, and the highest speed of T56 can reach 2-5 times the speed of some similar products. Waiting is very uncomfortable, T56 can greatly reduce your waiting time 8. EMMC programming function special introduction (1). The most functions EMMC programmer, which can perform one-key mass production operation on EMMC (also can be programmed with 4 machines in one computer) Load project files, load all parameter settings at once, and directly program. Read and write speeds up to 12MB / s-45MB / s (2). EMMC function introduction Package include:1*T56,USB cable*1, SOP8 clip*1, 1SOP28-DIP28*1 TSSOP28-DIP28*1, SOP8 150mil*1, SOP8 208mil*1, SOP20*1, SOP16 150mil*1, PLCC44*1, PLCC32*1, PLCC28*1, PLCC20*1, Sop8/SOP16*1, qfp32-100*1, wson8 6*5/8*6 *1, QFN32 0.65*1 , , KB9012*1, TSOP32/40/48/56*1, 1*SOP56,extractor*1