الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
COMPATIBILITY : The heat moisture exchange filter fit Z1, Z2 and more cpa-pmachine,the filter is connected between hose/tubing, so to determine whether it fit for your machine, please compare the diameter of our filter pipe with the diameter of your machine pipe diameter. If the difference is small, then our filter fit for your machine
PORTABLE DESIGN : The heat moisture exchanger filter consists of a thick translucent housing and a blue sponge filter. Translucent housing makes it easy to see the product in use and ensures correct installation. The blue sponge filter in the middle filters out airborne particles and provides us with hot and humid gas. 6 parts in a bag. Universal in-line heat moisture exchange filter is compact and easy to carry, making it suitable for travel
HIGHER PERFORMANCE : The heat moisture exchanger filter is a waterless humidification unit that requires no additional power and takes up very little space, high density sponge filter absorbs heat and moisture from the environments and exhalations. The hot and humid gases are then returned to the inhaled air stream, preventing the lungs from drying out and providing a humidifying effect
EASY TO USE : Simply install the heat moisture exchange filter between the mas&k cp&ap tubing, a hose is required to connect tomask. Once connected, switch on the device and experience a constant stream of humidified gas. Tips: heat moisture exchange filter NOT fit for face&mask with a short interface. Please check connection size before purchase. Ensure that both connectors are fully seated and secure during installation
REPLACEMENT TIME : The heat moisture exchanger filter should be replaced after 7 days of use to ensure optimum performance. However your filters may last for a longer or shorter amount of time depending on environmental conditions. When not in use, the filter should be stored in a sealed plastic bag in a timely manner to avoid exposure to the air and adsorption of water vapour in the air, which will affect the use of the product