Specification:
Item Type: SDR Transceiver
Material: Aluminium Alloy
Battery: 1 x 3500mAh lithium battery 605585, delivery with built in battery.
Function:
Radio Transceiver: A QRP SSB HF transceiver with embedded DSP and SDR functions.
Launch: EER E level driven SSB launch stage.
Output: 13.8V power supply provides about 10W PEP SSB output.
Full Mode Support: USB, LSB, CW, , FM
DSP Filter: 4000, 2500, 1700, 500, 200, 100, 50Hz passband.
DSP Function: Automatic gain control (AGC), noise reduction (NR), voice trigger, voice trigger Xmit (VOX), RX attenuator attenuator (ATT), noise gate, driver control, volume control, dBm S meter
SSB Reverse Sideband and Carrier Suppression Transmission: Better than -45dBc
Receiver Noise Level MDS: -135 dBm (200Hz BW) at 28MHz.
Receiver Front End Selectivity: Steep tuning frequency -45dB, ten times roll off +/- 2kHz
Blocking Dynamic Range: 20kHz offset 123dB, 2kHz offset 78dB.
CW Decoder: Straight, Iambic-A, B keyer, VFO A/B + RIT and Split, and switch the corresponding relay band filter through I2C
Switch: OFF to shut down.
BAT: Built in battery power supply.
13.8: External power supply
DC 13.8V 3A: External power supply port
KEY: Automatic key body connection, A, B, single key.
PA: External power amplifier, PTT .
MIC: External microphone port.
UART: Serial communication port, command compatible with TS-480.
SPK: External speaker.

Package List:
1 x SDR Transceiver
1 x Mic
1 x Charger
1 x 3 in 1 Screwdriver