Main Controller: AVR MCU
Sensor: MEMS 3-axis sensor
Gyro Scale Range: ±2000 dps
Size: 43×27×14mm

Features:
4 Flight Modes: GYRO OFF Mode, NORMAL Mode, LEVEL Mode and HOVER Mode.
3 Wing Type: Standard, Delta-wing and V-Tail.
Standard PWM receivers, PPM and Futaba S.Bus receivers supported. Throttle output channel provided when using the PPM or S.Bus mode.
Separate basic gain adjustment for Aileron, Elevator and Rudder.
Remote master gain supported.

Standard PWM Receiver Connection
Notes:
[MODE] is used for flight mode switching of the gyro, connect it to a 3-way switch channel of the receiver to switch the flight mode in flight. [SBUS/PPM/G] is used for remote master gain adjusting, connect it to a proportional channel of a volume or slide lever of the transmitter to tune the master gain in flight.
The ESC or throttle servo is connected to the throttle channel of the receiver directly without passing through the gyro.
Pay attention to the polarity of the plugs. The orange signal line must always be on the top and the brown on the bottom.