Name: سطح بناء ثلاثي الأبعاد 200 مم × 200 مم (7.88 بوصة × 7.88 بوصة) لوحة بناء طابعة ثلاثية الأبعاد مطورة، ملصق منصة سرير حراري مع لاصق نقل مصفح، شبكة 10 مم، أسود (5 عبوات)
Brand: OVERTURE
Availability: InStock

مميزات خاصة

【Upgraded 3D Build Surface】 -- We upgrade the 3M 300LSE Adhesive with new laminated adhesive transfer tape, which guarantees excellent adhesion, but at the same time, enable you to remove it easily from the heated bed when need replacing, easy to install and use
【Good Flatness and Bubble Free】-- this Ultrabase is glass-based, bubble-free when being installed, which provides fast and uniform heating. Both the laminated adhesive and the platform sheet are heat resistant, which not only provides a strong bond, but also are not like to warp when being heated, contributing to a stable and consistent performance in guarantee beautiful prints
【Durable and Reusable】-- scratch resistant , special Inorganic finishing with hardness of 8 Mohs, not easy to break or wear out; easy to clean, It is acceptable to touch acids and alcohols, you can wipe down with isopropyl alcohol between prints for best results, so that you can reuse it for multiple prints.
【200*200 with 10mm Rigid】 -- This Ultrabase is compatible with small size desk 3D FDM printer. Works with ABS, PLA, PETG, PETT, PVA, HIPS, ASA, Flexibles, Nylon and more. Easy to remove the prints by hand or with the help of some tools such as peeler or scrapper. 10 mm rigid allows you to cut it into your desired size.
【Service and Guarantee】-- Our Overture Build Platform surface is designed to achieve very good first layer adhesion and increase the chances of getting beautiful prints. In order to provide our customers with better shopping experience, we offer 90-day money back. Feel free to contact us and get full refund or new one if there is anything unsatisfying.

وصف

Some customers reflected that the Previous 3d printer build mat adhere too well to remove from the heated bed, so we upgraded our Overture Build Platform surface to this Easy-to-Remove version. This 3d printer build surface 200 x 200 features easy installation, excellent adhesion to the plate, and good performance in helping create strong adhesion for the first layer.

Tips:

HOW TO USE:

1. Just Tear off the laminated transfer tape on the back and stick it on heat bed.
2. We suggest clamping the build surface to the print bed with binder clips（recommend 4 clips) after long term use in case of possible warping

HOW TO REMOVE:

Heat the bed to 50~60 Celcius, then use a putty knife or print removal tool gently work blade along edges, then you can easy to remove it. Finally washed with hot soapy water, or wipe with acetone after the bed cools back down. . Please be careful not to scald your hands.

Packaging List:

3D build surface x 5 packs

مرحبًا،

بحث

سطح بناء ثلاثي الأبعاد 200 مم × 200 مم (7.88 بوصة × 7.88 بوصة) لوحة بناء طابعة ثلاثية الأبعاد مطورة، ملصق منصة سرير حراري مع لاصق نقل مصفح، شبكة 10 مم، أسود (5 عبوات)

مميزات خاصة

وصف

منتجات شبيهه