Custom Dynamics Magic Strobes Tour-Pak Brake Light & Corner Flasher with 10 Strobe Patterns Riders can easily plug Magic Strobes into the stock harness and select from 10 flash & strobe patterns by simply spinning the built-in dial. Features: Applies brake flash/strobe pattern to center Run/Brake portion of the Tour-Pak LEDs and allows left and right corner LEDs to flash/strobe when functioning as Run/Brake/Turn. NOTE: To provide clear signals, normal turn signal flash will automatically override the brake flash/strobe when simultaneously braking and turning. Over-current/thermal/short circuit/reverse wiring protection. 84W, 12V system. Sealed weather-tight case. WORKS WITH LED's ONLY Plug and play installation for stock Harley-Davidson LED Tour-Pak on 2014-2024 Electra Glide, Ultra, Road Glide Ultra, and Tri Glide models including CVO This unit will strobe the Tour-Pak only and can be used with or without the Magic Strobes BCM or Magic Strobes RSG to apply brake flash/strobe patterns to rear fender brake lights. 5 Year Warranty Patterns: Pattern 0: Four Flashes then Solid Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat Pattern 2: Seven Flashes then Solid Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat Pattern 6: Blaster X Pattern for 6 Seconds, then Solid Pattern 7: Custom LED Blaster X Cycle, Repeat Pattern 8: Max Strobe 4 Seconds, Solid Pattern 9: No Pattern Finish: Black Dimensions: Length - 4.2" Width - 1.4” Height - .6" Fitment: Plug and play installation for stock Harley-Davidson LED Tour-Pak on 2014-2019 Electra Glide, Ultra, Road Glide Ultra, and Tri Glide models including CVO