مميزات خاصة

Note: The Raspberry Pi and Servo in the photo are not included
Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven; 2.You should connect higher power supply for higher-power servo; 3.Make sure servo are connected properly, otherwise they will not move.
Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you.
Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano.
I2C controlled, using only 2 pins; Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales); Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal.

وصف

Features:
Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano
I2C controlled, using only 2 pins
Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc
Reserved I2C control pins, allows to work with other control boards

Specifications:
Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)
Servo voltage: 5V
Logic voltage: 3.3V
Driver: PCA9685
Control interface: I2C
Dimension: 65mm x 30mm
Mounting hole size: 3.0mm

Package Including:
1 * PWM Servo Motor Driver IIC Module
1 * RPi screws(2 pack)

مرحبًا،

بحث

وحدة تشغيل محرك سيرفو MakerFocus PWM IIC وحدة 16 قناة PWM مخرجات دقة 12 بت I2C متوافقة مع Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH وJetson Nano

مميزات خاصة

وصف

منتجات شبيهه