Instruction for use:
This hydraulic hose is for use with high-pressure applications such as hydraulic jacks and has a maximum working pressure of 10,000 (pounds per square inch) psi.
It is 10ft in length, with an outer rubber jacket for resistance to abrasion and two layers of steel wire braids for strength and resistance to expansion.
It has a rubber strain relief crimped on each end for improved life and durability, with a 3/8" NPT fitting on one end and a CH-604 fitting on the other. Industrial hoses transfer or convey air or liquid in hose systems.
Specification and parameters:
Outermost: Fabric, Synthetic Rubber
Innermost: Synthetic Rubber
Inner Material: 2 high-tensile steel wire braid
Length: 10ft
Oil pipe specifications: 3/8 internal thread interface (70Mpa/110Mpa)
Dimensions: 72"L x 0.37"W
Inner Diameter: 1/2 inch
Outer Diameter: 0.87 inch
Pressure: 10000 PSI
Package content:
1×High Pressure Hydraulic Hose
Note:
The internal thread needs to be connected to the female connector before being connected to various split products.