Product description:
Sparkle Color Shining 3D Printer PLA Filament which gives your printing a wonderful experience!
Premier Material: Blending of polylactic acid (PLA) and fine shining particles
Color: Black
N.W: 1KG
Diameter: 1.75mm
Print Temperature: 195-235 °C
Hot bed Temperature: 50-60°C
Speed: 30-60mm/s
Some printing tips: : 1. Nozzle : ≥0.4mm 0.4 mm or larger nozzle and low print speed is recommended
2. Please do not start the cooling fan at first 3 layers of model. Set the layer 0.1mm will be the best surface smooth and shiny. Set the outer layer in a slowly speed , 30-60mm/s
3. Clean or change the nozzle before printing is good way to reduce jam if it was used for many times.
4. It's better try to release the filament to its original status after print, and place remitting filament back to original vacuum bag and stock them in a cool and dry place after print. Filament can absorb moisture from air and affect its quality and performance.

Note:Because the color is a little translucent, so this batch of marble black low-cost processing.