Features:
100W siren amplifier for single speaker (11Ohm) setup.
Class D amplifier for low amp draw and clean tone.
12-24VDC multi-voltage.
Siren Interlock function that disables siren activation without primary warning.
4 x 5A relay output switch.
22 selectable tone cycles comprised of international and European tones.
Positive input for Horn Ring Transfer.
Radio Re-Broadcasting (RRB) and PA function.
12-button handheld controller with a built-in microphone.
Compact design with aluminum chassis.
Programmable Code 1/2/3 buttons, momentary/maintained/timer switch, siren volume, tone.
Reverse Polarity Protection
Specifications:
Compliance: SAE J849 EVS1; CA13; ECE R10; CISPR 25
Input Voltage: 12~24VDC
Standby Current: 0mA (w/o IGN wire / 4A (w/ IGN wire)
Avg. Current: 8.5A @ 12VDC / 4A @ 24VDC
Max. Current:
10A @ 12VDC / 5A @ 24VDC (w/o light control outputs)
30A @ 12VDC / 25A @ 24VDC (w/ light control outputs)
Siren Output Power: 100W
Siren Output Load: 100W-ACR 11Ohms
Siren Frequency:
761Hz – 1592Hz (WAIL/YELP/PHASER)
362Hz – 733Hz (HI/LO)
Operating Temp: 86F to 149F
Input/Output: +VDC, IGN (Ignition), Radio Audio Input (+/-), -GND,
SW1~SW4, Speaker Output (+/-), Horn Ring Transfer Input
Siren Controls:
(5) On/Off buttons (Siren, Radio, Code 1, 2 & 3)
(3) Momentary buttons: (PTT, MAN, HORN)
(4) Momentary/Sustained/Timed buttons (SW1, 2, 3 & 4)
SW1 can be set to interlock SW2, 3, 4 & Siren
IGN (Ignition) input connection
HORN input connection
Light Controls: 4 lighted push button switches
Light Output Ratings: Built-in 5A fuse on each of the (4) outputs