Usage instructions: WARNING-Always test temperature of the water before putting hands into the WAX MACHINE 1. Place the collar ring on the rim of the MACHINE. 2 Remove the plastic lid from the WAX MACHINE. 3. Adjust the wax-can holder on the wax can for easy handling 4. Turn the temperature control knob and set the dial on 100"until the wax achieves liquid condition. 5. This process lasts approximately 15 minutes for faster heating and place the lid on the warmer. 6. Once it becomes liquid, place the dial in middle place. The temperature remain constant throughout the day. It is important to test the temeperature of the wax by placing a small quantity on the inside of wrist and adjusting the dial accordingly 7. When the wax is finished, take out the can. Using the wax-can holder while the warmer is still warm 8. Turn the warmer off every evening by full turning the dial counter clock Cover the warme with the clear lid to keep the wax dust-free. To clean the warmer, use wax clean the machine when it's off and whil warmer is still slightly warm 9. For a new usage, repeat steps 1 to 7. CAUTION-EXTREMELY HOT WATER MAY CAUSE BURNS