Features:
1. The bright digital tube is clearly displayed, and it can be clearly read whether it is used during the day or at night.
2. The sensor can be replaced at will by using the 2P terminal. When you need to use other probes, you can replace it at will.
3. ABS material shell, not only exquisite and beautiful, designed with compressor delay, alarm when temperature exceeds temperature limit.All these promise the best to this temperature controller., high mechanical strength, good electrical performance.
4. Main function: Switch the modes cool and heat, control temperature by setting the temperature set value and the different value; Temperature calibration, refrigeration control output delay, alarm when temperature exceeds temperature limit or when sensor error.
5. High cost performance, with better support and better service. Stainless steel shell, resin seal treatment, not rust, not general deformation.

Specification:
Model: STC-1000
Temperature Measurement Range: -50 to 99 degree centigrade
Resolution: 0.1℃
Accuracy: +/1%(-50 ℃-70 ℃)
Control Accuracy: +/- 0.1 degree centigrade
Sensor: NTC 10K L = 1M probe
Power consumption:
Power supply: AC/DC 12V
Relay contact capacity: Cool(10A/220VAC), heat(10A/220VAC)
Ambient temperature: 0℃- 60℃
Storage temperature: -30℃-75℃
Relative humidity: 20-85%
Mounting size: 71mm x 29mm
Front Panel Size: 75x34.5mm
Sensor length: 1m (include the probe)

Package Includes:
4* STC-1000 Digital LED Temperature Controller