Feature:
1, DC 5-32V wide voltage power supply, with anti-reverse power supply capacity;
2, the output rated load: AC / DC 0-50V / 2A; maximum load: AC / DC 0-60V / 3A (within 100ms);
3, the output port is normally open type of switch contacts, the contact is not charged node, the current direction without requirements;
4, the input control high and low selectable; built-in current limiting resistor, you can directly use the power of the positive or negative control, you can also use the microcontroller I / O port control;
5, the module anti-interference ability, stable performance; trigger current minimum 0.1mA;
6, with power indicator (red) and each way relay status indicator (blue)
7, the use of blue terminals;
8, module size: 5.0cm * 3.0m * 1.0cm (L * W * H)

Precautions:
This module can be used directly for signal or resistive load control;
If you are using control for inductive loads (eg small motors, solenoid valves, etc.), keep more than 3 times the remaining amount and add freewheeling diodes at both ends of the inductive load.

Module control :
1. DC+ : Positive DC power supply;
2, DC-: DC power supply negative; (DC5-32V).
3, XM: Trigger side COM port, can choose high level or low level to trigger through this interface.
4. X1: trigger terminal, can choose high level or low level trigger, trigger current only needs 0.1mA.
Low-level trigger: XM connected to positive, X1 input 0-2V;
High-level trigger: XM connected to negative , X1 input 3-32V;
Relay output:
1, NO1: relay normally open interface;
2, C0M1: relay common interface;

Package Included:
1*1-Channel Solid State Relay Module

If you for any reason are not happy with any product supplied , please do not hesitate to contact us and we will do our best to solve your problem .