Parts List
1-Spectre Power Plate
1-1” Extension bracket
4-M6-1.0×70mm hex bolts
4-M6 flat washers
4-M6 lock washers
1-M6 flat screw
1-Gasket

FITMENT
Compatible with 2007-2012 Chevy Avalanche 5.3L, 6.0L
Compatible with 2007-2013 Chevy Suburban 5.3L, 6.0L
Compatible with 2007-2013 Chevy Silverado 1500 4.8L, 5.3L, 6.0L, 6.2L
Compatible with 2007-2013 Chevy Tahoe 4.8L, 5.3L, 6.0L, 6.2L
Compatible with 2007-2013 GMC Denali 4.8L, 5.3L, 6.0L, 6.2L
Compatible with 2007-2013 GMC Sierra 1500 4.8L, 5.3L, 6.0L, 6.2L
Compatible with 2007-2013 GMC Yukon/Yukon XL 4.8L, 5.3L, 6.0L, 6.2L
Compatible with 2007-2013 Cadillac Escalade 6.0L, 6.2L

Installation Instructions
Step 1 : Disconnect the negative battery cable.
Step 2 : Remove the engine cover.
Step 3 : Separate the upper radiator hose clip from the intake tube.
Step 4 : Remove the two 10mm bolts & two 10mm nuts which secure the throttle body to the intake manifold.
Step 5: Using a 4mm socket, remove the two studs that previously held the throttle body to the intake manifold.
Step 6 : Using the supplied bolts, washers, and gaskets, install the Spectre Power Plate.
Step 7 : The ball stud (from step 3)must be relocated.
Step 8 : Reinstall the intake assembly by placing it over the throttle body, MAFS, and the ball stud.
Step 9 : Fully tighten the clamps securing the intake assembly to the throttle body and MAFS.
Step 10 : Install the C.A.R.B. exemption label near the factory emission label.
Step 11 : Reconnect the negative battery cable.
Step 12 : Start the engine and let the vehicle warm up. Shut the vehicle off and recheck your installation, making sure that all bolts and hose clamps are fully tightened.