Fork spring compressor kit is an absolute necessity for anyone who intends to service or change springs in an inverted cartridge fork.
Simple screw in pins for location on the spring top spacer. Pulling the fork tubes near the top makes it easier to use.
The compression tool is made of aluminum and it won't scratch your fork like steel ones; The spacer is made of high quality steel, strong and durable.
When pressing down, make sure that your hands are as close as possible to the clearance ring and that both handles are screwed in as far as the fork will allow. There should be a certain gap to avoid crushing the fork internals.
Designed to compress the fork springs to allow access to the top cap lock nut, for assembling and disassembling. Can also be used to change seals, springs, bushings, cartridges, oil, or just to service your forks.
وصف
Easily thread onto the damping rod to facilitate cartridge fork bleeding and prevent the typical mess when changing fork oil.
شريط رافعة 50465 من Tie Down Engineering مقاس 2 بوصة × 15 قدم، غطاء 5000#.
KWD 10.500
-15%
Milwaukee 204B-20M M12 12V Stackshell Black (متوسطة) فقط
KWD 100
مجموعة محور محور وعجلات من محور CV الأيسر أو اليمين لـ Yamaha Grizzly 550/700 2007 2008 2009 2010-2014 ، Kodiak 450 2018-2021 ، 2 CV Axles و 2 Wheel Lealings
KWD 52.500
-10%
كيس تخزين Kemimoto متوافق مع Can-Am Commander Maverick Trail Sport ، وحدة التحكم المركزية بين منظم المقعد تخزين الكتف Eva مقاومة للماء
KWD 37
