SENTRO 48 knitting machines
First loop start: Turn the SENTRO 48 knitting machine's handle until the white Crochet is aligned with the yarn guide, and then leave a 30cm long yarn in the middle of the knitting machine to lift the yarn into the white crochet; turn the handle clockwise, and then cross the yarn on the hook. Finally, come out of the yarn guide and thread the yarn through the tensioner.

T Gear (Ring weaving): T gear can knit ring weaving, it is a loop weaving. On the first loop, it needs to be cross-hooked in the crochet. It is rotated clockwise, and the weaving is a cylindrical fabric. After finishing, it can be used as a hat or a scarf, etc. the diameter of the ring knitting is about 24cm.

P Gear (Flat weaving): P gear can knit flat weaving. After first lap, it will stuck, and then please reverse rotation. It needs to be rotated back and forth. The width of the fabric can be woven according to the needs of the user. The width is about 32cm and the length can be customized. The customer should knit a piece of cloth and then splicing it.

Warm Tips:
This 48 spinning knittings machine is suitable for 1.5mm-4.5mm yarn.
In the first three to four turns of weaving, be very careful not to drop any stitches. Because the first laps are the foundation of success.
Do not rotate the handle too fast, or it will drop stitches easily.
You can add patterns and word you want on the finished scarves hats and gloves with crochet needle hooks, to make knitting more interesting.