ATG Tape or Reverse Wound Transfer TapeProduct DescriptionT.R.U. ATG-7502 is a Glass stabilized Solvent Based Acrylic Adhesive reverse wound transfer tape with gold siliconized paper liner reverse wound on a 1" plastic core designed to be used in an ATG dispenser/Gun. Pressure-sensitive adhesive pre-applied to a special release liner has good adhesion to paper, most plastic films, and metal foils. Tape is acid neutral (Acid Free) and is not soluble in water.ApplicationsGeneral mounting and holding - product assembly - design and packaging of prototypes - mounting nameplates - picture framing - paper web splicing - sealing envelopesATG Dispenses to be used T.R.U. ATG-50 Dispenser Scotch 700 Yellow Dispenser Scotch 085 Pink Glider (Please leave a note if using this Gun)Properties Adhesive: Solvent-Based Acrylic Thickness: 2.0 mils (carrier + adhesive) Release Liner: 50# gold paper Adhesion: 27 oz/in (to stainless steel test panel) Temperature Resistance: -22 F to +230 F Core: 3 inch diameterAlternative to 3M #924 & #987; Scapa #TD-200; Shurtape #TG-356; Tesa (NOPI) 7002-PV9.Note: Sizes will be the tape industry standard metric sizes, ex. 12mm for every 1/2 inch of nominal value tape width (Rolls are give or take 5% wider or narrower than the nominal size).