Description:
Condition: new aftermarket part
Fitment Type: direct replacement
Package Include: 1 x fuel valve stop solenoid
Replaces part numbers: 3919422 sa-4026-12 fs20-rp 1752 es rqv-k3919422
Note: red wire is for positive, black wire is for negative, white wire is starting wire.

Compatibility:
For cummins diesel 5.9L 8.3L fuel shut off solenoid,
also this stop solenoid used on many ford freight liner motor home and marine applications.

Please check the part number before purchasing to ensure fitment. If your have any question and You can contact us by email.

Installation Notes:
(1) Mounting bolt spacing. The two bolts that hold the solenoid to the bracket, they either have 2.5" or 3"center to center spacing.
(2) Electrical plug type. You probably need the 3 round pin connector unless you are replacing a solenoid indodge rampickup in which case you need the 3 flat pin connector.
(3) Rod end type. Usually 3" spacing goes with the heim joint rod end bearing shown in the picture above but have seen the drilled square join used here also.
(4) Voltage. Select the correct voltage for your system.