SPECS: M12x1.50 thread - Open End Style Black Lug Nuts - 48mm long
FITS: Vehicles with wheel studs requiring a 12x1.5 thread and wheels that take a Oversized 60-degree taper seat
VERIFY FITMENT: By matching this lug's specs (thread, seating style, hex, etc.) to match both your vehicle and wheel requirements. Or contact our Customer Experience Team to verify a safe and proper fitment.
INCLUDES: 20 Black Open End Lug Nuts, with 1 Socket Key.
The above shows only some models, if you have any problem ,contact our Customer Experience Team to verify a safe and proper fitment.
Installation Instructions:
1. Make sure wheel studs are clean and tight. Replace ortighten a problem stud.
2. Ensure the wheel is flat against mounting surface withstuds through each hole.
3. All nuts should be hand started and thensecured in a criss-cross sequence with a torque wrench and socket. Refer to your vehicleowner's manual or wheel manufacturer's guide for propertorque specifications. 12mm Lug size should use 70-80 torque.
4. Check and retighten all nuts after 25 miles of driving andagain after 50 miles, until wheel nut torque remains unchanged.