The 1T1V electric guitar wiring harness kit is soldered completely, so you do not worry about how to install. This will save much time for you, it included 3 way switch control knobs, 1 Tone 1 Volume Pots with 500K, the best one is that this wiring has connected hot dual pickups, value and good quality, you can take it and directly assemble to your guitar, no need to do any more, the all meet your need, and save much money for you.

Here is about wiring kit details:
Circuit wiring set for SSS SSH style Fender Squier Stratocaster straightly electric guitar with a modification, fit for 90s Epiphone S200 strat copy, project S-style guitar.
1 volume / 1 tone knob pots/ 3 way switch, 1 capacitors, 1 output jack socket, 1 dual black pickups, 1 A500k potentiometer, 1 B500k potentiometer.

★About Pickups
4 wires plus a sheild, RED and WHITE wires are twisted/soldered together, the GREEN and BARE wires are twisted/soldered together, 4 cores cable 2 from one coil, and 2 from the other. Just connect the wires between the 2 coils and wire it like the single coil you are replacing.
Made of ceramic magnets, triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise. It can be used in either location depending on the sound you want. Closer to the neck will give a more mellow sound, while closed to the bridge will give a brighter trebly sound.
Black body, chrome dual rails, twin bar as two pole can fully shielded for low noise and wired for hum cancelling, while it produces fairly high output and is optimized for high-gain applications, quiet and slightly warmer.
Pickups Size: 83*24mm / 3.27*0.94in, Weight:100g/3.53 ounces, Resistance:11k, fixing hole spacing: 75mm / 2.95in