Application:
Works With All 6.0L Oil Rails - 2003-2007

Using Instructions:
1) Remove the high pressure oil rail following service manual procedures
2) Using the ball tube removal tool, remove the ball tube retaining nut
3) Remove the ball tube and o-ring
4) Clean the pocket and opening seat
NOTE:The seat must be completely free of debris or imperfections to ensure the full expected service lift of the o-ring
5) Lubricate the new ball tube and supplied o-ring with clean engine oil
6) Install the o-ring into the o-ring seat in the oil rail
7) Install the new ball tube and retaining nut
8) Using a torque wrench, tighten the retaining nut to 100-foot-lbs.
9) Using the tool as a centering guide, center the ball tubes to prepare the oil rail for reinstallation onto the engine
10) Repeat this process for the remaining ball tubes and o-rings

Package Included:
1- Nipple Cup Socket( Installed & Removal tool)
8- Nipple Cups(Ball Tube)
16-O-Rings
9-Injector seals