【Material】: We upgraded High-quality metal pipe fittings and PVC pipes with excellent oxidation resistance, corrosion resistance and durability,it can prevent rusting and improve service life
【anti-leakage】The threaded brass fittings , don't worry about leaks. the entire steering system is always kept sealed during the deflation process, professional and efficient. the entire steering system is always kept sealed during the deflation process, professional and efficient.
【 more convenient】It can be disassembled and installed at the bottle mouth, and then the nozzle,sition the discharge fitting upward when pumping fluid with the rudder pump, it will allow air to be out from the cylinder.
【Installation Instructions】: Attach bottle to helm reservoir ;Connect bridge tube to bleed fittings on steering cylinder and loosen/open fittings.;Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm;Manually swing the outboard through full articulation to relieve trapped air and confirm good bleed.
【After sales service】: We provide warranty service. If there is any problem with the product, please contact us
وصف
Instructions:
1. Connect the bottle to the helm water tank (don't pierce the bottle and don't let the bottle empty).
2. Connect the bridge tube to the drain joint on the steering cylinder and loosen the joint.
3. Use the rudder to pump fluid through the system by turning the wheel in one direction.
The bubbles will be pushed to the helm of the reservoir.
4. Through the fully articulated joint, manually swing the outboard motor to release the
trapped air, and confirm the good air-out.
5. Note: Position the discharge fitting upward when pumping fluid with the rudder pump, it will allow air to be out from the cylinder.
6. Repeat step 3 and step4 as needed until no air can be seen in the bridge tube.
7. Tighten the drain joint before removing the bridge tube.
الخزانة الخيط مع قضيب غطاء الفرشاة ، قفل ضيق Threadlocker ، قفل الخيط الأحمر عالي القوة ، القفل والختم ، البراغي ، السحابات والمعادن ، ضد التلاشي والتسرب - 30 مل
KWD 11.500
AGS Automotive Solutions 8oz Brush Top Shortantment Kit-تشمل الشحوم العازلة ، ومواد التشحيم متعددة الأغراض ، ومواد تشحيم الفرامل ، ومواد تشحيم مضادة للسيئة (4 عبوات)
KWD 35
Liqui moly diesel plater plater protector | 250 مل | SKU: 2000 | حزمة 6
KWD 44
Ultra 1Plus SAE 75W-140 زيت الترس الاصطناعي ، API GL-5
KWD 71
