The YPA C4XLR is an adapter featuring XLR and Microdot connections allowing you to attach a miniature DPA microphone to a preamp, mixer, camera, or similar device able to supply phantom power.
The adapter is functional at 12V, but requires 48V for the connected mic to reach full specifications. The active-signal balanced wiring allows for longer cable runs with less noise—with a common mode rejection ratio (CMRR) that is better than 60 dB in the 50 Hz to 15 kHz range.
Adapts Miniature Mic to XLR Connector
Connect to Mixer, Preamp, or Camera
Allows Mic to Operate on Phantom Power
Supports 12 to 48V Phantom Power Sources
Connector A: 1 x Lockable Microdot Male
Connector B: 1 x Lockable 3-Pin XLR Male
Output impedance: 100 ohm
Cable drive capability: 300 m (984 ft)
Power supply: 48V ±4 V
Current consumption: 3.5 mA
CMRR at 1 kHz: > 60 dB
Package Weight: 0.16 lb
Adapter Size: Ø0.75 x 2.9"(Ø19mm x 74mm)
Box Dimensions (LxWxH): 4.3 x 2.8 x 1"
in original box
1* C4XLR Microdot Adapter
1* Protective nets
1* Carry Case