Genesis Technologies brake bleeder bottles make bleeding brakes clean and easy with the cable mount bleeder bottle. Just attach the valve on out 12" brake bleeder hose to your brake system open the valve and pump a few times on the brake until the fluid hose is full with no air bubbles. The cable mount, as well as the magnet mount bottle, feature an internal bottle tube for bottom fluid entry. The no spill/no leak hose storage bung on the top cap acts as a vent while in service. The large 16 oz. bottle holds twice the fluid as other bottles, which allows more flushes before having to empty. The cable mount bottle features a stainless steel lanyard that is perfect for hanging the bottle from the bleeder screw or a lug stud.

How To Use

Connect the brake bleeder hose to the fluid catch bottle
Attach the brake bleeder valve to the brake furthest from the master cylinder
Secure the bleeder to bottle to a metal surface using the magnet or hang in a vertical position using the lanyard
Open the bleeder valve on the vehicle and press down on the brake pump pedal several times
Wait until the brake fluid hose is full with no air bubbles and then close the bleeder valve. Repeat this step with other wheels
Fill your master cylinder reservoir with brake fluid if unsure refer to vehicle manual