مميزات خاصة

【Carb Spacer Specification】 Edelbrock 2696 adapter ; Square bore to Quadrajet and Thermo-Quad manifolds Adapter ; Mount Edelbrock Square-Bore Carbs to Stock Q-Jet & Thermo-Quad ; Size：0.850" Thick
【Fitment】The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter 2696 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM spread-bore intake manifold (typically GM vehicles that were originally equipped with the Rochester Quadra jet carburetor).It could also be used to replace for stock Q-Jets and T-Q Intakes
【Fitment】 This Adapter was designed to make a square bore carburetor fit a factory spread bore manifold. I'm assuming your intake manifold is a spread bore type. Edelbrock carbs are square bore in design.
【Advantage 】This carburetor adapter plate helpes with increased intake manifold pressure at idle and also improves horsepower and torque through the entire rpm range and responds much better than 750 Ed did It could be used for many vehicles update such as Dodge, Chevy, GM, GMC, Ford Ect
【Packge Include】1x Aluminum Adapter; 1x lower gasket (intake to adapter), 1x upper gasket (adapter to squarebore carb), 4x screws to bolt adapter to intake ， 4x studs and nuts to bolt carb to adapter ；Please probably use the studs, Dont over tighten, Proper design works for its intended application without vacuum leaks.

وصف

Edelbrock 2696 Square-Bore to Spread-Bore Carburetor Adapter Plate

➤【Fitment】
This adapter plate will allow you to use an Edelbrock square-bore carburetor on a stock Q-jet or Thermo-Quad intake manifold with a spread-bore flange

➤【Item specifics】

Carburetor Adapter Plate Model or Series: Square Bore Spread Bore

Carburetor Adapter Style: Individual Ports

Carburetor Adapter Material: Aluminum

Carburetor Adapter Finish: Natural

Carburetor Adapter Height: 0.850"

Carburetor Base Flange: Square Bore

Intake Manifold Flange: Spread Bore

Adapter Style: Individual venturi ports

OEM Part Number：2696

Thick: 0.850 inches

➤【Package Include】

1* Edelbrock 2696 Square-bore carburetor adapter
1* Gasket; Square-bore
1* Gasket; Spread-bore
4* Carb studs; 5/16”x1-1/2”(Carb to adapter)
4* Nuts;5/16"-24
4* Lock Washers; 5/16"
4* Fillister Head Bolts 5/16“x3/4”(Adapter to intake)

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه