مميزات خاصة

Features: 12.9 CL , Pre oil , Fully threaded
Size: M8x1.25x70 Bolt
Used to open the secondary clutch for many Can-am ATV's & SXS's
Will not work with the factory X3 spreader they use a larger bolt.
These 70mm bolts are the PERFECT length (Opens Clutch COMPLETELY but WILL NOT ALLOW OVER THREAD in and Over Stress Clutch Springs)

وصف

For CAN AM OUTLANDER/ RENEGADE/ COMMANDER BELT REMOVAL TOOL.

A MUST HAVE FOR BELT/TRANSMISSION SERVICE.

Installation:

THIS BOLT WINDS CLOCKWISE INTO THE ONLY THREADED INSERT ON THE SECONDARY/DRIVEN CLUTCH TO SPREAD APART THE SHEAVES WHILE COMPRESSING THE SPRING FOR EASE OF BELT REMOVAL,

THEN JUST WIND OUT COUNTER CLOCKWISE AFTER BELT IS RE-INSTALLED AS YOU TURN THE SECONDARY/DRIVEN CLUTCH CLOCKWISE FOR INSTALLATION OF THE BELT.

BE SURE TO KEEP BELT IN THE CORRECT ROTATION DIRECTION ( IT WILL BE MARKED).

These 70mm bolts are the PERFECT length (Opens Clutch COMPLETELY but WILL NOT ALLOW OVER THREAD in and Over Stress Clutch Springs).

I have used these bolts for my own Can Am ATV clutches and they work perfectly to install a new drive belt

مرحبًا،

بحث

أداة إزالة تغيير حزام القابض الثانوي M8 8 مم من Unlimited Rider M8 لـ Can-am MAVERICK COMMANDER OUTLANDER RENEGADE ATV's & SXS's، متري بولت M8 x 1.25 x 70، 12.9CL، زيت مسبق، ملولب بالكامل

مميزات خاصة

وصف

منتجات شبيهه