Selumi metal cutter instructions for use
This product needs to be mounted on an electric drill in order to be used. The power of the drill is used
to drive the circular gear cutter to cut the sheet metal. The cutting of thin metal sheets is achieved by
the bite of the rotary gear main cutter and the circular sub cutter. The cutting of thin metal sheets is
realised by the occlusion of the main rotating gear cutter and the circular sub-cutter. The cutting effect
is flat and burr-free.

This product can be used with different styles of electric drills, practical, easy to operate, safe to use,
please rest assured that use!
Suitable for: universal drills, lithium battery drills.
Drill shears can cut.
0.2-1 mm iron plate.
0.3-1.2 mm white iron plate.
0.2- 0.8 mm steel plate;.
0.3-1.2 mm copper plate; and
0.3-1.2 mm aluminium sheet
Cardboard within 2 mm.
Note: 1. Electric drill shears are not suitable for cutting plastics, and are not recommended for cutting
special high hardness alloy materials. If it gets stuck, set the drill to reverse so it can exit automatically.
Tip: 12V hand drill has a slightly lower shearing capacity, while 21V hand drill has a higher shearing capacity,
users can choose the hand drill according to their needs.