To get your sterling engine started using boiling water, follow these simple instructions:
1 Prapare a cup of boiling water
2 Find a stable, heat-resistant surface to place the water, and Carefully place the sterling engine on top of the cup filled with boiling water.
3 Allow the sterling engine to sit on top of the cup for about 30 seconds. During this time, the engine will start to absorb the heat from the boiling water.
4 After the waiting period, use your finger to flick or spin the wheel of the engine gently. The initial spin will help kickstart the engine's motion.
5 As the engine begins to move, carefully observe its back-and-forth motion. The heat energy from the boiling water causes the engine to run, converting thermal energy into mechanical work. Enjoy the mesmerizing motion and appreciate the principles of heat transfer and energy conversion at play.

Remember to exercise caution when working with boiling water to avoid burns or scalding. Always handle the sterling engine with care to prevent any accidental damage.
This low temperature stirling engine,runs on a hot cup of water(Do not put it above a candle or fire)
Diameter: 100mm
Height: 112mm
Main material: PC/ABS/ stainless steel 304
Weight: 158g
Speed: up to 180-250 RPM
Minium start Temerature Difference: 30 ℃
This sterling engine requires minimum 35° Celsius of temperature difference to operate. The greater the temperature difference between the top and bottom plates the higher RPM you will get.

Package Includes:
1 x Low Temperature Stirling Engine