How to use:
Step 1: Distinguish the front
The colour facing up for the front, when sticking, the front must remain facing up.

Step 2: Cut colored paper
Cut the correct size according to the content of the engraving.

Step 3: Soak color paper
Put the cut color paper in water and wet it for 1-2 minutes. Peel off the coloured paper from the backing film after soaking.

Step 4: Stick the object
Please hold the front up and use a scraper to remove air bubbles and wrinkles. It is necessary to buy a scraper together. Please dry the coloured paper with a hair dryer before engraving.

Step 5: Prepare for engraving
Place the object on the engraving machine and select the engraving pattern. Pay attention to the direction of the pattern. You may need to turn the pattern over when you engrave it horizontally.

Step 6: Start engraving
Wait for the engraving process to complete.

Step 7: Soak colour paper.
After completing the engraving, soak in water for 5 minutes. Completely soaking makes it easier to peel off excess coloured paper.

Step 8: Remove excess colour paper.
Take out the soaked item and patiently remove the excess colour paper.

Step 9: Product Presentation
DIY as you like.