Instructions for use of INSPOP epoxy resin:

Step 1: Preparation
1⃣: First of all, the performance of the resin can be better exerted under the right environment. It is better to work under the temperature of 70℉-82℉.
2⃣: Please work in a well-ventilated and dust-free environment.

Step 2: Measuring and mixing
1⃣: Mix the resin and hardener in a volume ratio of 1:1. If you use an electronic scale to measure the weight, the ratio of A to B should be 1:0.9. For example, if you pour 50g of A, you should pour 45g of B.
2⃣: Mix A and B together and stir until they are transparent and thin. This takes about 2-4 minutes.

Step 3: Pour
1⃣: If you need to pour in multiple layers, please pour the second layer after the surface of the first layer of resin is semi-cured. Semi-cured is not flowing on the surface, but it is still a little soft. This process takes about 4-6 hours.

Step 4: Handling bubbles
1⃣: INSPOP resin hardly has bubbles after the defoaming period. If you wait for half an hour after the defoaming period, there are still a small amount of bubbles, then it is easy to eliminate them.
2⃣: Use a needle or fire gun to eliminate air bubbles. When using a torch to defoam, please pay attention to sweep quickly, the flame can not stay in one place, otherwise it will cause the resin to change color. And the flame needs to keep a certain distance from the resin surface.

Step 5: Cure
1⃣: The pouring thickness of the resin, the number of pouring layers, air humidity and temperature will all affect the curing time. Under normal circumstances, the initial curing (semi-curing) time of our resin is 4-6 hours, and the complete curing time is about 24-32 hours. Please wait for complete curing before demolding.