Feature:
1. Complies with PCI-Express 1.0 standard, Ultra ATA 133 hard drive support, and downstream compatibility with Ultra ATA 100/66/33 standard.
2. The adapter card supports hard drives with a capacity of 137 GB or more (48-bit LBA mode).
3. Support 1 external ESATA interface and 1 internal SATA interface, the transfer rate can be up to 3GB/s.
4. Support for RAID 0 / RAID 1 / RAID 0 + 1 mode, JBOD support, with various storage methods.
5. The operation is simple, insert the adapter into the corresponding PCI-Express slot, read the drive disk and insert the hard drive to use.

Specification:
Item Type: Adapter Card
Material: PCB
Color: black board
Chip: for JMB363
Transfer type: PCIe to 2 internal SATA + IDE + 2 external ESATA (external ESATA and internal SATA can only use 2 at the same time, select by bridge, default is 2 internal SATA interfaces)
SATA transfer rate: up to 3Gb / s
Supports hard drives with a capacity of 137 GB or more (48-bit LBA mode)
1 IDE interface supports up to 2 IDE devices
How to use:
1. Open the computer housing and remove the rear block
2. Insert the adapter into the corresponding PCI-Express slot
3. After installing the chassis, turn on the device, read the drive disk, install the drive, and then connect it to the hard drive for use

Package List:
1 x Adapter Card 1 x Driver CD