Comes with 8 Fuse Kits- You will get 1 x Mini USB to hardwire kit,1 x installing crowbar, 8 x fuse tap cable, 4 x Cable Hiding Clips dash cam hardwire with the most popular fuse types will meet the applications for most car models.
24 Hours Surveillance – Makes the parking monitor of your dashcam work! Keeps it powered even after the engine is off, protect your car all the time! The vehicle hard-wire kit connected to a car battery or fuse box power can uninterruptedly supply power for the dash camera for 24 hours. It can even supply power when the car is turned off.
Wide Compatibility- Input: 12V-24V; Output: 5V/2A (also fits for 1A) this hardwire kit is compatible with all car mini USB dashcam such as dashcam, mirror cam, GPS navigator, accepts voltage from any type of vehicle runs on 12 – 24V.
The low voltage protection value is adjustable(Press to open the Pruveeo smart hardwire kit screen in any mode.get the current current/voltage value.):
When the (toggle switch) is adjusted to the left, the default voltage is 11.5V/23.5V. When the smart hardwire kit detects that the input voltage is lower than the set voltage value, it will automatically power off..When the (toggle switch) is adjusted to the middle, the default voltage is 11.8V/23.8V. When the smart hardwire kit detects that the voltage value is lower than the set value, it will automatically power off..When the (toggle switch) is adjusted to the right, the default voltage is 12V/24V. When the smart hardwire kit detects that the voltage value is lower than the set value, it will automatically power off..Adjustable voltage range: 12V input state is 11-13V; 24V input state is 23-25V (when 12V input, the low voltage detection error is ±0.2V; when 24V input, the low voltage detection error is ±0.4V)..Please Note the Smart hardwire kit NOT Compatible with Pruveeo Battery Models:J40