Specification: Name: 1500W Pass up Constant Current ModuleType: Non-Isolated Pass Module (Boost)Input Voltage: DC10V to 60VInput Current: 10V-30V Input Voltage, Maximum Current is 35A-40A; Input Voltage 31-60V, Maximum Current is 30A-35AIdle Current: 15mA (when converts 12V to 20V, higher output voltage will increase idle current)Output voltage: 12-97V continuously adjustable (cannot be used to reduce voltage) Output current: 22a (related to input and output voltage difference, the largest voltage difference is, the smallest output current will be. Improve heat dissipation when current exceeds 15a)Constant current range: 0.8-22a (+/- 0.3a)Reverse input protection: Yes (150A Power MOS Reverse protection)Low voltage protection introduction: Yes (10V-50V Adjustable, Self Recovery)Operating temperature: -40℃ to 85℃(if the temperature is too high, Improve heat dissipation)Frequency: 150kHzConversion efficiency: 92% to 97% (efficiency is related to input/output voltage, current and voltage difference. The minor difference is that the highest efficiency will be)Input over current protection: Yes (automatically protect when the input is more than 40A, and the voltage of the power supply will not increase)Short circuit protection: Yes (60A input fuse) Please operate carefully, try not to cause short circuit.Reverse input protection: Yes ((150a power MOS tube, it is can reverse connect during long time)Installation method: four 3mm matchups Wiring method: terminal blocks (use large current copper wire)Output power: max. Output power = input voltage*30a (if input 12V, maximum output power = 12V*30A = 360W)(If input 24V, maximum output power = 24V*30A = 720W)Weight: 372g / 13.1oz (approx. )Package List:1 x Module