Installation steps1. Open the back cover from the screw hole, take out the PCBA motherboard, and insert the M.2 NVMe SSD into the motherboard M.2 interface;2. Install the screw to fix the hard disk so that the SSD is close to the screw hole;3. From the back of the motherboard Fasten the screws to fix the SSD; 4. Align the sliding grooves, put the PCBA motherboard into the aluminum case, push it toward the Typec interface end, and lock the screws to fix it to complete the installation.Product name M.2 NGFF.NVMe SSD hard disk enclosureProduct model M2PVC3 Main control RTL9210BTransmission speed NVMe protocol10Gbps; SATA protocol6Gbps Material Aluminum alloy ABS plasticColor BlackSize 108mm(L) *32mm(W)*11.5mm(H)Output interface vUSB3.1 GEN2 TypeC Transmission rateNGFF 5Gbps, NVMe 10Gbps Data cable USB TypeA to TypeC, 0.15m; USB TypeC to TypeC, 0.15m;Poweron status blue light is always on;Transmission status blue light flashing; Only sleep 10 minutes without reading and writing, automatically enter sleep to reduce hard disk lossPackaging1. ELUTENG TypeC M.2 NVME 10G hard disk box;2. TypeA to TypeC and USB TypeC to TypeC data cables;3. Lanyard;4. Thermal pad;5. User manual