V2S Modular Chassis transmission: Designed for 1/24 custom crawler builds using the V2S Modular Chassis. This LCG transmission with skid includes a machined Delrin skid with 8mm chassis mounting hole spacing. Check chassis fit before ordering
Low center of gravity crawler setup: The rear-facing layout positions the motor lower in the chassis to help lower the build's center of gravity. Its compact design supports motor and electronics placement in a V2S custom build
12mm Mini Komodo motor mount: The included gray-anodized aluminum motor plate has a 12mm M2 mounting pattern for Mini Komodo-style brushless setups. The 12mm motor mount dimension is separate from the skid's 8mm chassis mounting hole spacing. Motor and ESC are not included
1/24 crawler gearbox: Delrin gears with integrated stainless steel shafts run on sealed steel bearings. This 2.68:1 crawler transmission uses a 55T, 0.3 mod spur gear for controlled power delivery in technical crawling
Transmission with Delrin skid: The assembled transmission and skid weigh 14.8g and allow approximately 2mm of lateral adjustment. Includes the corresponding 12mm motor plate, Delrin skid, two M2 brass standoffs and hardware. Designed for rear-facing motor installation; check clearance before assembly
وصف
Build a compact, low-mounted drivetrain for your V2S Modular Chassis 1/24 crawler. The CUOBIM LCG transmission pairs a rear-facing motor layout with a machined Delrin skid, positioning the motor lower to help lower the build's center of gravity.
This version includes a [9mm M2 motor plate for Micro Komodo-style setups / 12mm M2 motor plate for Mini Komodo-style setups]. The corresponding motor plate is machined aluminum with a gray-anodized finish. Low-friction Delrin gears with integrated stainless steel shafts run on sealed steel bearings. The transmission uses a 2.68:1 ratio with a 55T, 0.3 mod spur gear.
The included Delrin skid has 8mm chassis mounting hole spacing and allows approximately 2mm of lateral transmission adjustment. The transmission and skid weigh 14.8g assembled. Package contents: one transmission with the selected motor plate, one Delrin skid, two M2 brass standoffs and one hardware set. Motor, ESC and chassis are not included.
Fitment: Designed for V2S Modular Chassis custom builds and rear-facing motor installation. Fit with other chassis has not been verified. Forward-facing installation may interfere with the front upper links; check motor and link clearance before assembly.
What's Included:
1x 1/24 Crawler Transmission
1x Delrin Skid Plate
2x M2 Brass Standoff
1x Hardware Set
NOTES:
This is NOT a universal transmission, but might work with other custom builds. Skid hole spacing is 8mm. It is specifically designed for V2S Modular chassis and may not work with other chassis .
This transmission is designed for rear facing motor. Can possibly be mounted motor forward with some modifications, but will likely have clearance issues with the front upper links.
Flat skid with 0 degree motor rotation. This skid comes standard with the komodo style transmission, for other brushless motor, please beware of potential clearance issues.