This M.2 to SATAs adapter card provides a reliable solution for connecting an M.2 NGFF (Key B+M) slot on your motherboard to a standard 7-pin SATAs device. It is designed to extend your system's storage capabilities without requiring internal drive bays, making it an ideal component for compact PC builds, system upgrades, or adding secondary storage
Specification:
Product Name: M.2 to SATAs with power adapter card
Product model: NGFF1ST-N02
Product interface: M.2 KEY B-M SATAs 7PIN
Color: Blue
Support system: for WinXP/for Vista/for Win7/for Win8 32-bit/64-bit for OS 10.8 or higher
Size: Approx.8 * 2.2 * 0.5cm(3.15 * 0.87 * 0.20in)
This item is to extend the motherboard's M.2 NGFF slot out of the SATAs 7PIN connector. This adapter board simply connects the signal from the M.2 KEY B-M connector to the SATAs 7PIN connector, so the adapter card does NOT need to be driven. If you do not recognize the interface, please check if it's the SATAs signal KEY-B. This card supports 2242 2260 2280 size motherboard. The default is 2280. If you want to use other sizes, just cut it along the V-CUT line in the middle of the PCB.
Extend the motherboard's M.2 KEY B-M slot out of the SATAs 7PIN connector. This adapter board simply connects the signal from the M.2 carrier to the SATAs 7PIN connector, so the adapter card does not need to be driven. If you do not recognize the hard disk, please check the interface of the SATAs signal. This adapter card does NOT have a power supply, so you need to take power from the SATAs interface of the host power supply.
Package List:
1 * NGFF (M.2) to SATA3.0 Converter Card
1 * 4-pin Power Cable
1 * Screw
Note:
1. Please allow slight error due to manual measurement
2. Different monitor colors may be different. Thanks for your kind understanding