Before Installation Notes

1: Pre-installation testing
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap.
This protects sensitive phone components from potential static damage.
Wear safety goggles and handle carefully to avoid injury from glass fragments.

2: Simulation testing required
Screen replacement is very fragile product. We strongly suggest test before installation.
Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen)
connected audio cable and new replacement, power on, test finished.
If test OK, please install it. If it can not show, please contact us at the very first time.
And please do not force it to be installed in mobile phone.
We will not be responsible once the screen is installed.

3: Do not over-bend cable
Please make sure LCD cable Do not over-bend.
Over 90 degrees bent will cause black display.