Start a Meshtastic Build Without Starting from a Blank Board
The Seeed Studio XIAO ESP32S3 & Wio-SX1262 Kit is designed for makers, developers, Meshtastic beginners and LoRa hobbyists who want a compact, pre-flashed hardware platform for mesh networking, LoRa projects and sensor prototypes.
Why This Kit Helps
Ready for Meshtastic: Pre-flashed firmware helps reduce the first setup barrier for new users.
Compact LoRa platform: ESP32-S3 MCU plus SX1262 radio hardware supports 862–930MHz LoRa communication.
Wireless flexibility: Supports LoRa, 2.4GHz Wi-Fi and BLE 5.0 for different project paths.
Maker-friendly assembly: Press-fit board connection reduces basic hardware setup work.
Expandable development: Arduino, MicroPython, XIAO expansion boards and Grove modules help extend the kit beyond a basic node.
Core Specifications
MCUESP32-S3 dual-core Xtensa processor, up to 240MHz LoRa RadioSX1262-based LoRa hardware Frequency862–930MHz WirelessLoRa, 2.4GHz Wi-Fi, BLE 5.0 DevelopmentArduino and MicroPython ExpansionI2C, UART, SPI, GPIO/PWM, ADC, XIAO and Grove expansion paths PowerUSB Type-C interface and lithium battery charging management Size21 × 18 mm XIAO form factor Choose the Version That Fits Your Build
VersionBest ForPackage Basic KitCustom development, embedded projects, sensor prototypes and custom enclosuresXIAO ESP32S3, Wio-SX1262 extension board, Wi-Fi antenna, LoRa antenna Kit with 3D CasePortable starter node, cleaner physical setup and beginner-friendly assembly pathXIAO ESP32S3 + Wio-SX1262 kit with 3D-printed enclosure, 2dBi 868–915MHz SMA antenna, 20cm USB Type-C cable Project Ideas
Meshtastic node or router
DIY off-grid messaging test node
Single-channel LoRaWAN gateway experiment
LoRa / LoRaWAN sensor platform
Telemetry prototype with external sensors
MQTT-connected mesh gateway experiment
Wearable or embedded wireless project
Build Notes
This is a modular development kit, not a finished GPS tracker. GPS, screen, battery, waterproof enclosure and solar charging are not built in. Select the Basic Kit for maximum customization, or choose the 3D Case version for a cleaner starter-node setup.