مميزات خاصة

Low Voltage Battery Protection: This DC 12–36V low voltage cutoff module automatically disconnects the load when the battery reaches the preset voltage, helping prevent over-discharge and extend battery life.
Programmable Settings: Built-in buttons and a 3-digit LED display make it easy to set the low voltage disconnect value, reconnect difference value, and delay turn-on time from 0–999 seconds.
Wide Application: Compatible with 12V, 24V and 36V lead-acid batteries, lithium-ion batteries and solar battery systems. Suitable for RVs, cars, boats, solar projects and DIY battery protection setups.
Compact & Accurate: Control accuracy is 0.1V, power consumption is less than 1.5W, and the maximum instantaneous current before circuit breaker trip is 20A.
Important Use Note: This voltage protection device works as a relay switch only and does not change voltage. For stable long-term use, keep working current under 8A; maximum current is 10A below 12V and less than 8A above 12V.

وصف

This DC 12–36V low voltage cutoff module is designed to protect batteries from over-discharge by automatically disconnecting the load when the battery voltage reaches the preset value. It is suitable for 12V, 24V and 36V lead-acid batteries, lithium-ion batteries and solar battery systems. The module features a 3-digit LED display and onboard buttons for easy parameter adjustment. Users can set the low voltage disconnect value, reconnect difference value and delay turn-on time according to their system needs. Settings are saved automatically after power off. Please note that this product is a voltage controller and relay switch module. It only turns the output on or off and does not increase, decrease or stabilize voltage. For long-term stable use, the working current should be kept under 8A. The maximum current is 10A when voltage is below 12V and less than 8A when voltage exceeds 12V.

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه