Core Functions
This aluminum burette clip is designed for secure fixation of burettes during laboratory titration experiments. It provides a stable and reliable hold, ensuring precise liquid dispensing and minimizing the risk of spills or movement that could compromise experimental accuracy. This essential laboratory accessory addresses the need for no need hands use.
Usage Guide
1. Preparation: Ensure the titration stand rod is clean and dry. Loosen the adjustment knob on the clamp.
2. Mounting: Slide the clamp's opening onto the vertical stand rod. Position it at your desired height.
3. Securing: Tighten the adjustment knob firmly by hand to fix the clamp securely onto the rod. Avoid using tools to reduce overtightening.
4. Inserting Burette: Open the clamp jaws by pressing the lever or turning the screw, depending on the model. Place the burette into the cushioned jaws.
5. Final Adjustment: Gently close the jaws around the burette and secure it. Ensure the burette is vertical and stable before proceeding with your titration setup.
Key Specifications
| Attribute | Details |
| Primary Material | Aluminum Alloy, Rubber |
| Product Weight | Approximately 197g / 6.9oz |
| Product Dimensions | 25 x 12 x 6 cm / 9.8 x 4.7 x 2.4 in |
| Color | White |
| Compatibility | Designed for standard laboratory burettes |
Package Contents
You will receive one (1) aluminum burette clamp.
Important Notes
Due to differences in monitor calibration, the actual product color may vary slightly from the images shown.
Manual measurement may have a slight tolerance of 1-2cm. Please allow for small dimensional variations.