All laminating pouches are not the same. Oregon Lamination Military Card size 10 mil x 2 sides heat activated gloss laminating pouches 2-5/8” x 3-7/8” (67mm x 98mm x 250 microns thick x 2 sides) with Transparent Blue laminate one side and clear laminate other side provide a great way to departmentalize proximity Cards, badges and access passes where the colored border around the card can easily be seen by security.
Construction is 10 mil thick film on each flap for major durability, strength, rigidity and protection. ALERT: Many pouch laminators on the market can seal a maximum of only 5 mil pouches, so PLEASE make sure your laminator is capable of sealing 10 mil pouches prior to ordering. (If you don't have your machine's manual, a good reference is if your laminator has either a speed control OR a temperature control, it will likely seal 10 mil pouches).
Note: Industry standard specification for 10 mil laminating pouches is 10 mil on each flap for a total of 20 mil added to your paper sheet. 1 mil equals 1/1000th of an inch (metric: 25 microns). The industry calls these pouches, yet they are sealed on only one edge instead of three (like a folder, but with 3/32” flat seal for the fold).
Oregon Lamination is among industry leaders in providing the quality laminating supplies. Our laminating products provide high value protection using quality materials. This product has heat activated adhesive compatible in all thermal pouch laminators capable of sealing 10 mil 2-5/8” x 3-7/8” laminating pouches.
Oregon Lamination laminating pouches have not been setting on the shelf for years. This means fresh adhesive may melt faster than expected, which means potential faster running times or somewhat lower temperatures might be used.
Oregon Lamination laminating supplies are manufactured to stringent specifications designated by actual users of the product to achieve high clarity with minimum defects.

FEATURES:
Transparent Blue laminate one side and clear laminate other side with heat activated adhesive provide an excellent way to departmentalize proximity Cards, badges and access passes where the colored border around the card can easily be seen and recognized
High glossy finish brightens colors dramatically
Small Pre-Rounded Corners for a Safe Professional Finish approximately 1/8” radius (3mm)
Metric Pouch size: 67mm x 98mm x 250 microns thick (x 2 sides = 500 microns total thickness added to your sheet)
Recommended Insert Sheet Size: Maximum 2-3/8” x 3-5/8” (60mm x 92mm) provides standard 1/8” (3mm) sealed edge border protecting your sheet's edges

TYPICAL APPLICATIONS:Department Access
Badges
Sale Signs
Membership Cards
Proximity Cards
Badges
Visitor Passes
Laminating Tips:When trying ANY brand for the 1st time, consider running at a slightly lower temperature (or faster speed). If the results are cloudy, you can always run the sheet again at a higher temperature or slower speed, but you cannot fix heat blisters caused by running too hot.
If you plan on trimming or punching sheets, wait 24 to 72 hours for adequate adhesive curing and a professional cut edge.

Note: Thank you for considering Oregon Lamination brand laminating products, designed by people who do laminating for a living and provide a performance guarantee.