ATTENTION:
One of the most common reasons a stator breaks down is due to a broken regulator, which burns the stator in no time.
Therefore we highly recommend you to switch both parts.
Technically modified stators are excluded from exchange.
This regulator is not suitable for lithium-ion batteries! The battery or other electric parts can be damaged!
Replacement Part Number:
Stator Assy: 026100050000, 026.10.005.00.00
Rectifier, regulator: 026100050000, 026.10.005.00.00
Gasket, generator cover: 026010530000, 026.01.053.00.00
Fits Make/Model/Year:
Fit for Beta RR 250 2T 2013-2023
Fit for Beta RR 300 2T 2013-2023
Fit for Beta RR 250 Racing 2T 2014-2022
Fit for Beta RR 300 Racing 2T 2013-2022
Fit for Beta X-Trainer 250 2T 2017-2022
Fit for Beta X-Trainer 300 2T 2015-2022
Fit for Beta RR 300 Holcombe Replica 2T 2019
Package Includes:
1 x Ignition Stator
1 x Voltage Regulator
1 x Generator Gasket
(Comes exactly as pictured.)
Note:
Before installing your new stator regulator rectifier;
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.
Our stator / regulator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.