Resistor Units
Waterproof and excellent heat dissipation.
Generally used in LED car taillights, frequency converters, car braking equipment, and industrial control equipment on large power supplies. The LED car aluminum housing resistor is used to adjust the flashing speed of LED lights
Description:1.After changing the installation of LED lights, the car's trip computer will show that there is a problem with the newly installed LED lights, etc.
2.In order to solve this problem, the installation of this product can solve the phenomenon of false alarms due to the installation of LED lights in the driving computer car.
3.When using a resistor to solve the stroboscopic, all the turn signals (the small side lights do not need to install a resistor) change the LED turn lights, you must install a resistor.
4.It is recommended to use 25W for small lamps with low current demand such as turn signals, reversing lights, rear fog lights, indicator lights, daytime running lights
5.It is recommended to use 50W for brake lights, front fog lights (change to surround), and other light bulbs with large current requirementsInstallation is easy! Put the wire into the button hole of the wire clip, press the button, and then fix the resistor body and it's OK. It's that simple! Can solve the problem of false alarms, false alarms, and stroboscopic (connect resistors in parallel to the positive and negative poles of the alarm stroboscopic bulb)
==========
Accuracy : 1%
Model Number : 25W 8R/ 50W 6R
Type : Wirewound Resistor