This Transparent Shell is for the TBS Tango 2. You can customize it and make it yours! This shell is for newer versions of the Tango 2 Radio (after March 2021) which have a slightly larger screen compared to the older versions.TBS TANGO 2 WITH NEWER SCREENSDue to the pandemic, TBS was unable to source the same screen used since its initial launch. Luckily, they found a replacement! However, it requires modification of the case to accommodate the new electronics.VIDEO: Opening the housing of the TBS Tango 2FeaturesFits the newer version of the TBS Tango 2 Radios.Transparent - Great for customizingDistributed by Team Black SheepLarger Screen OpeningINSTALLATION For customizing purposes (paint job, hydro-dip, etc), TBS leaves the led diffuser, speakers, and buttons uninstalled.BUTTONS AND DIFFUSERPut it in place through the plastic pins.With your soldering iron, melt the pins down to hold the buttons down.SPEAKER UNITThe speaker unit on your existing case is held on with glue. Carefully cut into the glue along the wall of the speaker unit with an Exacto knife.Pull out the speaker and rub off the leftover glue.Install the speaker to the new case with silicone adhesive.SpecificationsCompatibility: TBS Tango 2 with New ScreenColor: Transparent (Clear)Includes2x Momentary Switch Buttons1x [Exit Menu Page] Buttons1x Bottom Shell1x LED Diffuser2x Case Tags1x Top Shell