The TrueRC X-AIR 5.8GHz MK II Antenna Stubby Combo works with the HDZERO FPV Goggles. Slide the antennas onto the module's rails and screw on the custom knurled SMA connectors to obtain 10dBic gain combined with a healthy flyable beam width of 120deg. Pair with TrueRCs OCP Omni Antennas to yield an amazing flight experience in a compact and low-profile package! Note: Goggles and Omnis are not included.VIDEO: (Insert Video Title here in Bold)FeaturesSuper wide 120-degree beam for each antenna combined with a 135deg beam widthLarge SWR and axial ratio bandwidth, work even out of the 5.8GHz bandMount directly onto the HDZero Goggles with included slide-on mounts.Compact low-profile design, easy to store and transportHigh 10 dBic for long-range and signal penetrationCustom knurled SMA connectors Circularly PolarizedLOW PROFILE DESIGN - ONLY 15MM THICK15mm thickness allows you to leave them attached at all times without fear of breaking them. The included slide-on mounts fit natively on the HDZero FPV Goggles for easy installation.CUSTOM SMA CONNECTORSAs with all other components of X-AIR antennas, the custom SMA connector is made to the highest standards to fit your HDZero FPV Goggles perfectly and make sure every bit of RF power is transferred from the X-AIR. PAIR WITH OCP ANTENNASPair with OCP omnidirectional antennas for a complete antenna system!SpecificationsBeam-width @-3dB**: 68deg.Polarization: RHCP or LHCPDimension: 32 x 32 x 15mmBandwidth: 5.1GHz-6.7GHzConnector: SMA maleBeam-width*: 120degGain: 9.5-10.5 dBicIMPORTANT NOTES*Coverage of individual antenna where reception is at least equivalent to an omni.**Coverage of individual antenna where at least 70% of the max range is obtained.Recommended (Not Included) (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")LinksThingiverse: HDZero FPV Goggles Rail Mount AdapterIncludes2x TrueRC X-AIR 5.8GHz MK II Stubby Antennas (Choose Polarization)2x TrueRC X-AIR 5.8GHz MK II Ante