Stop Reordering - Start Working
Most splinter guard strips come one to a package. When it wears out, your project stops until a new one arrives. Our 2-pack changes that. Two full 118-inch rolls give you what professionals actually need: a spare on hand.
Real Usage, Real Benefits
Track saw users replace these strips regularly. Sawdust, moisture, and repeated passes wear them down. With two rolls:
Install the first strip on your most-used guide rail
Keep the second roll in your tool bag or workshop
Replace worn strips immediately without delaying projects
Use one roll for shorter rails by cutting to length
Both rolls are identical - no compatibility concerns
Material That Holds Up
These aren't thin tapes that curl at the edges. The 0.1" thickness provides substantial material that withstands:
Repeated saw base sliding
Heat buildup from friction
Workshop temperature changes
Occidental moisture exposure
The adhesive bonds securely to aluminum rails but removes cleanly when replacement time comes.
Simple Truth About Compatibility
These strips fit the groove on Makita guide rails (part #194367-7). If your track saw system uses that style channel, these will work. This includes most Makita SP6000 series saws, plus many Festool and track systems. The 0.8" width seats properly in the channel without overhang.
Actual Installation - No Tricks
Remove worn strip completely,Clean rail groove
Peel 6-8 inches of backing paper
Align strip in channel, press firmly
Continue peeling and pressing along full length
Trim excess with sharp knife
Make a test cut on scrap material
For Users Who Actually Cut Materials
This isn't theoretical. When cutting:
Plywood for cabinets - no face veneer tear-out
Hardwood flooring - clean edges for tight joints
Melamine panels - chip-free cuts
Solid surface countertops - smooth finished edges
Trim work - precise miters without blowout
Specifications That Matter
Package Contents: 2 rolls splinter guard strips
Each Roll: 118" long 0.8" wide 0.1" thick
Material: Synthetic rubber with pressure-sensitive adhesive
Works With: Makita SP6000J/J1, SP600K/K1, 4350CT, 4350FCT, 4351CT, 4351FCT series
Also Compatible: Most Festool and track saw guide rails
Color: Black
Why Two Is Better Than One
Single rolls leave you searching for replacements mid-project. Two rolls mean:
Continuous workflow when first strip wears
Backup available immediately
Cost savings over buying separately
Less packaging waste per inch of material
One purchase covers immediate and future needs