Parameter
-Battery Platform: DEWALT 20V MAX (DCB200/201/202/203/204/205/206/230/240 etc.) (battery NOT included)
-Nail Capacity: Up to 3-½" (89 mm) nails
-Collet Type: Magnetic, quick-load
-Head Positions: 3-click adjustable: 0° / 45° / 90°
-Motor: Brushless (maintenance-free, cooler runtime)
-Lighting: Built-in LED work-light ring
PACKAGE
1* Cordless Palm Nailer
Safety Checklist
-1. Battery OFF, Switch OFF
Remove the battery pack before loading nails, clearing jams, or changing angle head—prevent accidental fire.
-2. Magnetic ≠ Finger Guard
Keep thumb & fingers 2 in. clear of magnetic collet; the nail can still be driven if trigger bumps.
-3. Personal Protective Gear
Safety glasses (mandatory); gloves (optional but recommended); Ear plugs when driving into metal hangers
-4. Secure Workpiece
Clamp small stock; a palm nailer's single-point force can kick boards or joist hangers sideways.
-5. Cool-Down & Storage
Let tool rest 5 min before stowing after 200+ rapid nails. Store with battery removed, head at 0°, in the supplied bag to avoid accidental trigger pressure in the truck.
Application Scenarios
-1. Joist-Hanger & Strap-Tie Installation Drive 1-½" – 3-½" hanger nails overhead, between 16" o.c. joists, or inside rim-board corners
-2. Decking & Fencing Repair
Snap head to 45° and fasten hidden hanger brackets under deck boards or rail posts without removing planks.
-3. Cabinet & Drawer Face Frames
0° nose fits inside 12"-deep cabinets to toenail face-frame joints or back-nail crown molding strips—LED lights the interior.
-4. Pole-Barn & Truss Work at Height
Work off a ladder or lift: cordless power means no dragging a hose,
-5. Tight Attic & Crawl-Space Retrofit
Palm-size body plus magnetic collet lets you secure electrical strap plates, joist bridging, or sub-floor squeak screws in 18" clearance.
-6. Metal Connector Hardware on Sill Plates
Rapidly sink 2-½" galvanized nails into sill anchors while head is flipped to 45°