Product description
The wall after polyurethane coating is not clean and smooth, this foam insulation cutting removal tool can make the wall clean and tidy. Trim corners quickly and easily.

Parameter:
Name: Open-cell/Closed-cell Foam Planer
Voltage: 110-240V
Power: 1800W
Current: 8.6A
Speed: 14.5m/s
Scraper Length: 50cm (19.6inch), 70cm (27.5inch)
Head Selection: Open Cell/Closed Cell

Features:
1.The 50cm/70cm spatula provides a larger flat area, enhancing work efficiency.
2.The foam polishing tool features a rotating head that allows it to be placed directly on the stud, minimizing effort and maximizing precision during operation.
3.Built with an extra thick aluminum plate for support, this foam planer is sturdy and wear-resistant, ensuring long-lasting performance even under heavy use.
4.Foam Planer Saw - Built-in bearings enable quick, precise corner trimming for a smooth, full-width cut across the entire blade width.

Package List:
1 x Spray Foam Flatting Saw

Operating Instructions
1. Firmly grasp the power cord and blade handle with both hands.
2. Thoroughly trim the bottom two feet of the wall surface first to prevent the cutting blade from running through debris piles.
3. Never allow the cutting blade to contact steel hooks or support brackets, as the force and speed required for rapid foam cutting may cause the blade teeth to tear on sharp edges.
4. For easier, cleaner cuts, maintain blade rotation and apply light pressure while moving the cutter upward along the wall surface.
5. Use a small electric drill to power the cutter for trimming around outlets, hooks, and other narrow edge areas.